Purified Water Treatment System Ro Desalination System Reverse
Osmosis Desalination Plant
Product Introduction of RO Water Treatment System
RO system is widely used in water treatment, purification for tap
water, well water, underground water, borehole salty water,
brackish water and seawater, pure water and ultra-pure water
production. Application area such as, food processing, bottled
drinking water, home use drinking water, power stations, electronic
industries, cosmetics production, pharmaceuticals manufactories,
and medical treatment(such as hemodialysis). It is a key equipment
for pure water plant and ultrapure water equipment.
The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to
a pressure of 6-20 kg, the raw water permeates through the reverse
osmosis membrane with a pore size of only 0.0001 microns under the
action of pressure. Chemical ions, bacteria, fungi, and virions
cannot pass through, and are discharged with wastewater. Only water
molecules and solvents with a volume of less than 0.0001 microns
are allowed to pass through.
Technical Specifications of RO Water Treatment System
| 30m³/h Reverse Osmosis System |
| Model | JFRO-30T |
| Host Size | 6000x1200x1800mm (can be customized) |
| Power | 37KW |
| Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
| Operating Pressure | 1.2~1.5MPa |
| Recovery Rate | 70% |
| Designed Water Inlet | 42t/h |
| Outlet Flow | 30t/h |
| Desalination Rate | ≥99.5% |
| RO Frame | SUS304/Carbon Steel (Optional) |
| Membrane Size | 8040 |
| Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
| Number of Membranes | 30 |
| Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
| High Pressure Pump | CNP/NYP/GRUNDFOS (Optional) |
| Tank Material | SS/FRP(Optional) |
| Control Valve | Manual/Automatic |
| Control Valve Brand | FLECK/RUNXIN |
| Membrane Housing | FRP |
| Number of Membrane housing | 6 |
Advantages of RO water treatment system:
(1) pressure is the main force in RO separation process, which does
not go through the phase transition of energy intensive exchange
and has low energy consumption; (2) RO does not need a lot of
precipitants and adsorbents, and its operating cost is low; (3) RO
separation engineering is simple in design and operation and short
in construction period; (4) RO purification efficiency is high and
environmentally friendly. Therefore, RO technology has been widely
used in domestic and industrial water treatment, such as
desalination of seawater and brackish water, production of medical
and industrial water, preparation of pure and ultra-pure water,
industrial wastewater treatment, food processing concentration, gas
separation, etc.
Process flow of RO Water Treatment System
the source water is pumped into the quartz sand filter to get rid
of rust, sediment, colloidal substances suspended solids, fibrous
materials, then to active carbon filter to adsorption of
hydrocarbon compounds, removal of the color, odor, a large number
of biological organisms, reducing the water I halogen and pesticide
pollutants, water and other contaminants trichloride, next step is
go to the sodium filter to soften water, reduce water hardness, the
water can be effectively adsorbed metal ions, thereby removing the
scale in water, then to precison filter to get rid of the very tiny
particles,these step we call it pretreatment, after that the
pretreated water go into the reverse osmosis device,since the
reverse osmosis membrane pore size is very small ,it will
effectively remove the water soluble salts, colloids,
microorganisms, organic matter, etc. finally the source water is
treated to output of pure water.
Photos of reverse osmosis water treatment system
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.
