Softener Water Treatment System Hard Water Treatment Plant
Product Introduction of Water Softener Treatment System
Softening water equipment is to use Yang resin to soften the main
purpose of the source water is to let
The resin adsorbs calcium and magnesium ions (the main components
of scale formation) in water and reduces the source water
Hardness, and can be intelligent resin regeneration, recycling.
1.Soft water refers to water that contains no or less soluble
calcium and manesium compounds
2. Bathe and wash with soft water to protect your skin from harm.
3.Use soft water to wash clothes to save 50%-80% detergent.
4.Soft water reduces the wear and tear of the clothes making the
clothes soft and the color stays longer
5.Soft water reduces water heater maintenance and repair
6.Soft water reduces scale formation.
7.Soft water prolongs the service life of wading appliances.
8.Soft water reduces the maintenance and repair of the pipeline.
Technical Parameters of Water Softener Treatment System
| No. | Model | Producing Capacity m3/h | Resin Tank(mm) D×H×unit | Salt Tank(mm) D×H×unit | Filled resin amount(kg) | Inlet & outlet Diameter (Inch) | Dimension L×W×H(mm) | Operating Mode |
| 1 | JFA-200 | 1 | 200×1200×1 | 300×600×1 | 20 | 3/4 | 1000×500×1800 | Single valve, single tank system, production stopped for 2 hours
during regeneration, flow rate/time type |
| 2 | JFA-250 | 1 | 250×1400×1 | 300×600×1 | 40 | 1 | 1000×500×1800 |
| 3 | JFA-300 | 2 | 300×1650×1 | 400×800×1 | 60 | 1 | 1050×540×1900 |
| 4 | JFA-400 | 4 | 400×1650×1 | 400×800×1 | 100 | 1 | 1150×540×1900 |
| 5 | JFA-500 | 6 | 500×1900×1 | 500×900×1 | 160 | 1-1.5 | 1450×750×2100 |
| 6 | JFA-600 | 8 | 600×1900×1 | 660×1200×1 | 240 | 1.5 | 1600×750×2300 |
| 7 | JFA-750 | 10 | 750×1900×1 | 760×1200×1 | 380 | 1.5 | 1600×760×2300 |
| 8 | JFA-900 | 15 | 900×1900×1 | 900×1200×1 | 550 | 2 | 1800×900×2400 |
| 9 | JFA-1000 | 20 | 1000×2000×1 | 1000×1200×1 | 750 | 2 | 2300×1100×2650 |
| 10 | JFA-1200 | 30 | 1200×2000×1 | 1200×1500×1 | 1000 | 3 | 2500×1400×2750 |
| 11 | JFA-1400 | 40 | 1400×2100×1 | 1370×1630×1 | 1500 | 3 | 3000×1400×2850 |
Product Workflow Chart of Water Softener Treatment System
Plant and Project Case Diagrams of Water Softener Treatment System
FAQ:
Q: What is the lead time?
A: Typically, the production cycle is 3-5 weeks, depending on your
project.
Q: How long do you guarantee it?
A: We offer a one-year warranty. Under the correct use and
maintenance, the service life of the product itself is about 5
years.
Q: Which machine should I choose?
A:It depends on your raw water quality and your requirements for
permeate water.
Usually there are three parts: pretreatment, RO machine, and post
treatment. Pretreatment could be UF(ultra filtration) system,
anti-scale dosing system, flocculant dosing system, disinfectant
dosing system, water softener, sand filter, carbon filter, security
filter etc. Post treatment could be UV sterilizer, Ozonizer, ClO2
sterilizer, etc. And maybe you need an EDI system. We will choose
proper process according to your raw water quality and permeate
water purpose.
