Water Reuse RO Water Treatment System 50TPH Water Filter System
Reverse Osmosis System Product Introduction:
High pressure pump, reverse osmosis membrane element, pressure
vessel shell (membrane), cleaning system and control apparatus of
the reverse osmosis system, reverse osmosis membrane pore size is
small to nanoscale (1 nm = 10 to 9 meters), under the certain
pressure, H2O molecules can pass RO membrane, and the source water
of inorganic salt, heavy metal ions, organic matter, colloid,
bacteria, viruses and other impurities through the RO membrane,
Thus, pure water that can be permeated is strictly distinguished
from concentrated water that cannot be permeated.
The Principle of Reverse Osmosis Water Treatment System
The raw water passes through the reverse osmosis membrane under the
action of high pressure, and the solvent in the water diffuses from
a high concentration to a low concentration to achieve the purpose
of separation, purification and concentration. Because its
permeation direction in nature is opposite, it is called reverse
osmosis.
Technical Specifications of Reverse Osmosis Water Treatment System:
| Model | JFRO-50T |
| Host Size | 7200x1500x1800mm (can be customized) |
| Power | 45KW |
| Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
| Operating Pressure | 1.2~1.5MPa |
| Recovery Rate | 70% |
| Designed Water Inlet | 70t/h |
| Outlet Flow | 50t/h |
| Desalination Rate | ≥99.5% |
| RO Frame | SUS304/Carbon Steel(optional) |
| Membrane Size | 8040 |
| Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
| Number of Membranes | 54 |
| Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
| High Pressure Pump | CNP/NYP/GRUNDFOS (Optional) |
| Tank Material | SS/FRP(Optional) |
| Control Valve | Manual/Automatic |
| Control Valve Brand | FLECK/RUNXIN |
| Membrane Housing | FRP |
| Number of Membrane housing | 9 |
| Pipe Material | U-PVC/ Stainless steel (Optional) |
Process Flow of Reverse Osmosis Water Treatment System:
Raw water pump - sand filter - carbon filter - cartridge filter -
high pressure pump -RO membrane host machine -RO cleaning system
Application Scope of Reverse Osmosis Water Treatment System
Residential and Villa Hotels/Hospitals Commercial Complexes
Kinderney Dialysis Rooms Poultry Farms Food and Beverage Industry
Bottled Water Plants Cooling Towers/Boiler Feed Water
Features of Reverse Osmosis Water Treatment System
1. The reverse osmosis pure water equipment adopts a fully
automatic control method to realize automatic operation and reduce
the influence of human error operation on the equipment belt;
2. In the pretreatment system, the design of the reduction system
is adopted to solve the irreparable impact of excessive residual
chlorine on the reverse osmosis membrane;
3. Imported reverse osmosis membrane is used in the selection of
reverse osmosis membrane, the service life can reach 3 years, and
the conductivity of effluent is lower than 10US/CM;
4. The southern special SUS304 stainless steel water pump is
selected for the pump series, and the running noise is low;
5. Using foreign professional design software, the recovery rate
can reach more than 65%;
6. It has the characteristics of high degree of automation, simple
operation, stable water quality and low operating cost. And widely
used in production water in various industries
Photos and details of Reverse Osmosis Water Treatment System
FAQ:
1, What are the inlet water quality requirements for ro water
treatment system membrane components?
Items | NTU | SDI | Residual chlorine(mg/L) | Fe2＋(mg/L) | TOC(mg/L) |
| Limits | ≤1 | ≤5 | | ≤4 | ≤3 |
2. What is the material of ro water treatment system membrane?
Acetate membrane (CA) : mainly because of its resistance to
chlorine, so it is still durable. But its suitable pH range is
small, easy hydrolysis
Aromatic polyamide membrane (PA) : water almost can not have
chlorine, only through a variety of pretreatment chlorine.
3. RO water treatment system configuration:
First-stage multi-stage process: if the recovery rate is not
achieved in the first stage (50-65% in the first stage and 65-75%
in the second stage), the multi-stage tandem filtration can be
used. The effective cross-sectional area of each segment decreases.
2:2 and 2:3 and 4:2:1
Multi-stage process: when the first stage process cannot meet the
effluent quality requirements (the first stage is generally
≤20μs/cm), the product water of the first stage process is sent to
another reverse osmosis unit.
The arrangement of membrane components can be divided into series
and parallel.
